Problem: iPhone network (communication)

Apple specializes in the production of high-quality gadgets that have everything you need for effective work and entertainment: performance, multimedia potential, a good camera, etc. The iPhone line is one of the most popular in the world and is characterized by the highest quality performance. However, sometimes even such smartphones can get out of order. Let’s have a look at some iPhone network (communication) problems.

iPhone does not see SIM card

One of the most common defects on iPhones is a problem with reading a SIM card. There are a lot of reasons for such a nuisance, and before you decide on how to fix your iPhone SIM card, you should figure out what caused the failure. There are the following reasons:

  • mechanical damage;
  • ingress of moisture;
  • no money on your account, that led to blockage.

Checking the operable condition of your SIM card is quite simple, you just have to insert it into another phone or put a new one in iPhone itself. If it works in the other device, then you should proceed to further testing of your device.

When you detected a malfunction of your SIM card, you have no need to call the operator for exchange immediately. Usually, the card stops working due to corrosion of the tracks on the board or the oxidation of the contacts. In this case, you can repair the SIM card by yourself. To do this, you will need a piece of cotton moistened with alcohol, with which you need to clean the contacts. Thus, you degrease the surface and can restore the performance of the SIM card.

Another common cause of potential damage lies in the state of a SIM reader. Sometimes, you can damage it through negative mechanical impact or blow. In this case, without the help of specialists, it is impossible to fix the problem. And it is better to contact our service center where we will replace the broken part.

Professional repair of iPhone is the key to the health of your gadget

If you have tried all possible methods of restoration, but nothing helps, you should contact the specialists of Mr Fix service center. We provide our customers with the following services:

  • high-quality repair using original parts;
  • warranty on work performed;
  • customer consultation;
  • ability to reflash the device with saving your data.

Turning to Mr Fix experts, you will not only get a fully working phone, but also a guarantee for all the work performed.

No signal on a network

You need immediately contact specialists to find out why there is no signal on a network on iPhone. First, try to diagnose yourself – reset or reboot your smartphone. If there is no signal due to a malfunction of the modem or wear parts, responsible for the activation of the mobile operator, you should contact a specialist.

There are several known causes for this error:

• software failure;

• interruptions in the work of the mobile operator;

• hardware problem: damage to the antenna or radio module;

• moisture ingress into iPhone body.

When you need a professional help?

If you have tried all the methods, but there is still no signal on a network on your iPhone, and you do not know how to remedy the situation, contact Mr Fix qualified specialists for help. Most likely, problems with the network arise due to hardware problems – our team will fix them after disassembling the device.

Mr Fix professionals offer favorable conditions for cooperation:

  • high-quality repair of iPhone using modern tools and original parts;
  • restoration of the device in accordance with the manufacturer’s recommendations.

If iPhone does not have a signal on a network or the SIM card is unavailable, leave a request on our website – experienced service providers guarantee prompt attention to your iPhone and excellent repair quality.

Bad signal on a network

One of the most frequent problems is a bad signal on a network, as a result of which the quality of communication deteriorates dramatically and the ability to use the Internet disappears.

Among the most common problems associated with the problematic identification of GSM networks are the following:

  • the smartphone was recently flashed (especially if you did it on your own);
  • the device was poorly repaired;
  • reset to factory settings;
  • incorrectly set date and time.

Also iPhone may not recognize the network if you have not used it for a long time. Sometimes this happens after incorrect installation of software functions or even during bad weather conditions. If you are in a zone with a good signal, but the connection is still low, the problem lies in the GSM antenna, which could be damaged due to mechanical damage, moisture or other factors.

In this case, it is not recommended to undertake independent attempts to repair the device, since this can only aggravate the situation.

What to do if iPhone poorly finds the network?

If you face a similar problem, you should look for the help of qualified professionals. Mr Fix team will not only conduct diagnostics of your iPhone, but also eliminate the cause of a malfunction of the GSM module in an hour.

Mr Fix specialists can help you to fix not just iPhone network (communication) problems, but also iPhone conversation and iPhone vibration problems.  Contact us and make your life easier!

Leave a Reply

Your email address will not be published. Required fields are marked *